Assembly instructions
Basic safety information
HIWIN MAGIC Distance Measuring Systems
MAGIC-01-14-EN-2207-MA
Page
8
of
32
2.5
Safety instructions for storage and transport
The distance measuring systems are delivered in suitable packaging. The systems must be left
in these until they are installed.
The distance measuring systems must be stored in dry areas protected from impacts.
No heavy objects may be placed on the products during storage and transport.
Note:
The measuring tape of the magnetic distance measuring systems must not be exposed to
strong magnetic fields (keep a distance to permanent magnets of linear motor axes!). Strong
vibrations (e.g. a blow with a hammer) can also damage the magnetisation of the measuring
tape.
2.6
Safety instructions for handling products carrying current and
voltage
Note:
Since the sensor is operated with a low voltage, it alone does not normally pose a risk of injury
or death.
2.7
Further information
If you have any questions, please contact our sales organisation:
Tel.: +49 (0) 781 / 9 32 78-0
Fax: +49 (0) 781 / 9 32 78-90
For questions regarding the documentation, suggestions and corrections, please send a fax to
the following fax address:
Tel.: +49 (0) 781 / 9 32 78-90
