Assembly instructions
Electrical connection
HIWIN MAGIC Distance Measuring Systems
MAGIC-01-14-EN-2207-MA
Page
23
of
32
If the encoder is connected according to Table 5.1, the counting direction (with the encoder in
motion) results according to the definitions in illustrations Fig. 4.1 and Fig. 4.4.
If you wish to have a positive counting direction in the opposite direction, when connecting to
the electronic evaluation system, you must switch “A” with “B and “Ā” with “B¯”.
Fig. 5.1: PIN assignment of the round plug
5.2
Sequential control
Fig. 5.2 Fig. 5.3 shows the recommended circuits of the subsequent electronics for the
individual channels for the analogue and the digital encoder.
Fig. 5.2: Recommended switching of the downstream electronic components with sin/cos 1V
SS
output
Fig. 5.3: Recommended switching of the downstream electronic components with digital TTL
output
