Press here to adjust the angle.
1. Make mounting holes and cable hole in
the place (ceiling or wall) to which this
dome camera is installed using the
Driling guide label.
2. To remove dome cover, turn the dome
body counterclockwise until locators
reach and of travel and pull off.
Push the liner on the sides where the
patterns are put in the teeth of a comb
and pull it out.
3. Attach the housing to the ceiling using
suitable fasteners, M6x35 tapping screw
are supplied only if they are suitable.
Turn the housing to right direction about
16 degree to lock in place.
4. The assembly of the dome body and
liner is in reverse order of disassembly.
Finally, lock dome body with locking
screw(M3x5) from the accessory kit.
7