<ADVANCED MENU>
AEME (Auto Exposure / Manual Exposure) selection, shutter / AGC
This type of control adjusts the exposure amount using the shutter speed.
12-1. AUTO
Exposure control is performed automatically.
AE LEVEL (Auto Exposure Lebel)
AE performs exposure control so that the OPD output level (evaluation value) is the target
brightness level (AE reference level). This control is called AE gain control.
AGC MAX
Maximum gain setting item in shutter priority mode AGC (Auto Gain Control)
This type of control adjusts the exposure amount during CCD signal input by applying AFE gain
SENS UP (Slow Shutter)
Low-brightness sensitivity enhancement menu
Select maximum Slow-Shutter (AUTO and Off)
12-2. MANUAL
Exposure control is performed manually.
12-3. FIX
Exposure control is stopped. AE does not track even if the subject brightness changes.
12. SHUTTER / AGC
Compensates for deviations in the white colour caused by changes in the colour temperature of
the light source so that the colours are reproduced correctly.
ATW
- ATW mode (1800ºK ~10500ºK)
Performs indoor / outdoor identification, estimates the light source, and performs WB control
automatically.
Push (Full pull-in)
This control is resistant to the effects of deeply colored subjects. The PUSH function performs WB
control automatically regardless of the indoor/outdoor and light source conditions. Compensation
may be performed incorrectly since this control is easily affected by deeply colored subjects.
USER1
The USER1 functions set the WB gain in accordance with preset values. (3200ºK)
WB control does not track even if the subject color temperature changes.
Adjust red or blue gain.
R(R-GAIN):Adjust R-GAIN value (0-255)
B(B-GAIN):Adjust B-GAIN value (0-255)
USER2
The USER2 functions set the WB gain in accordance with preset values. (5800ºK)
WB control does not track even if the subject color temperature changes.
Adjust red or blue gain.
R(R-GAIN):Adjust R-GAIN value (0-255)
B(B-GAIN):Adjust B-GAIN value (0-255)
13. WHITE BAL
15