Hitron HCB-P715NNB6 Instruction Manual Download Page 3

 

FCC COMPLIANCE STATEMENT

CE COMPLIANCE STATEMENT

CAUTION 

:  Changes  or  modifications  not  expressly  approved  by  the  party  responsible  for 

compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two 

conditions:  (1)  this  device  may  not  cause  harmful  interference,  and  (2)  this  device  must 

accept any interference received, including interference that may cause undesired operation.

WARNING 

:  This  is  a  Class  A  poduct.  In  a  domestic  environment  this  product  may  cause 

radio interference in which case the user may be required to take adequate measures.

FCC  INFORMATION 

: This  equipment  has  been  tested  and  found  to  comply  with  the  limits 

for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed 

to  provide  reasonable  protection  against  harmful  interference  when  the  equipment  is 

operated  in  a  commercial  environment.  This  equipment  generates,  uses,  and  can  radiate 

radio  frequency  energy  and,  if  not  installed  and  used  in  accordance  with  the  instruction 

manual,  may  cause  harmful  interference  to  radio  communications.  Operation  of  this 

equipment in a residential area is likely to cause harmful interference in which case the user 

will be required to correct the interference at his own expense.

2

Summary of Contents for HCB-P715NNB6






















Reviews: