![Hitecsa Verne WPHA HE 091 Installation, Operation And Maintenance Manual Download Page 5](http://html1.mh-extra.com/html/hitecsa/verne-wpha-he-091/verne-wpha-he-091_installation-operation-and-maintenance-manual_2140043005.webp)
5
IOM_WPHBA HE-WPHA HE_091a1201_207815_180701_EN
HORIZONTAL WATER-AIR COMPACT PACKAGED UNITS
WPHA HE / WPHBA HE
INTRODUCTION
Incorrect Operation
In case of breakdowns or operation faults, turn off unit.
Periodic Inspections and Maintenance
Carry out periodic inspections to detect possible damaged or broken pieces. If they are not repaired it could cause
damage to people or stuff. Before executing any maintenance operation, cut off the unit power supply.
Make sure to leave the maintenance areas open. If these areas have to be necessarily invaded by the construction of
air supply and/or lateral return ducts. Verify that the design of the ducts allow the access to the fans and the change of
the filters or that these are accessible from the other lateral.
All operations should be carried out in accordance with local safety regulations.
Repairing Operations
The reparations should be always and exclusively made by trained personal authorized by the manufacturer using
original spares. The safeties of the unit could be affected due to the failure to comply with these warnings.
Modifications
The manufacturer will not respond to the warranty and to the possible damages of the unit in case of electrical and/or mechanical
modifications. The unauthorized manipulation, reparation or modification of the unit will automatically invalidate the warranty.
Refrigerant
This product is hermetically sealed and contains R-410A which is a HFC fluorinated greenhouse gas.
This product is hermetically sealed and its operation depends on the use of R-410A which is a HFC fluorinated greenhouse gas.
REGULATIONS AND CERTIFICATIONS
ISO 9001 CERTIFICATION:
HIPLUS AIRE ACONDICIONADO S.L., trying always to find the maximum satisfaction of
costumers, has obtained the ISO 9001:2015 Quality System referred to its production activity. This will result in a
continuous determination to improve quality and reliability of all our products; commercial activities, design, raw materials,
production and after-sales service, are the means to reach our goal.
CE MARKING
: Our machines have got the CE mark, in conformity with the essential requirements of the applicable EC
directives and their last modifications as well as with the national legislation of each country.
EUROVENT CERTIFICATION:
HITECSA participates in the EUROVENT Certification program. Check certified products
on the web.