34
IOM_CCHBA- CCHA_201a1201_208029_200201_EN
CCHBA-CCHA
HORIZONTAL CONDENSER UNITS
WITH COMPRESSOR AND CENTRIFUGAL FAN
OPERATION
pGD1 or Mini PGD THERMOSTAT
–
Time schedule
E.
Forced:
In the display of the type of start-
up press the key “Prg” during few seconds. To deactivate this function you
must press the On-Off key to stop the unit and press it again to leave the unit in the type of start-up selected previously.
This option starts the machine during an established time in hours when you have selected the time schedule and for
example you are out of the schedule. When the forced time finishes the system returns to the type of start-up prior to the
forced.
Time schedule (HITSAA01)
Clock adjustment
Press the “
Prog”
key
Select
menu
5.
TIME
SCHEDULE
Modify Hour, Date and Day
Enable or disable DST (Daylight Saving Time).
By default, commonly stablished by the EU: Last Sunday of March move the clock forward one hour (from 02:00 to 03:00) and
last Sunday of October set back one hour (form 03:00 to 02:00).
Example:
DST of 60 min. Enabled from the first Monday
of February at 10:00 (goes off at 11:00) until
the last Sunday of October at 3:00 goes back
at 2:00.
Time schedule
Time schedule with pGD controller will only be possible when Th TUNE is not active. If you have connected pGD/Mini
pGD and also Th Tune thermostat, time schedule will be made through this device.
You have different types or possibilities of time schedule:
Schedule for every day of the week, two possible set-points SET1 and SET2 which are defined in the last display (part D). For
any operation mode, only introduce values in “Cooling” column, heating column is not taken into account. In heating mode,
change the set-points SET1 and SET2 if you want different set-points.
Example:
Commissioning on Monday at
8:00 with SET1 set-point until
14:00 and restart from 15:00 until
20:00 with SET2 set-point.
Schedule until 3 holiday periods to define.
Introduce the date of start and end
of period and the set-points if it is
ON or OFF.
Example:
Period from 25/12 to 31/12 in cold
and heat operation with set-points
SET1 and SET2.
From 1/8 to 31/8 set-point SET1
only cold.
