29
NiCd/NiMH Battery Program
[
cont.]
Once cycling has commenced, the charger will display the
following real-time information: battery type, charging/
discharging current, battery voltage, charging time and charged capacity. You will
also see “D>C“ or “C>D“. This will indicate which cycling order you have chosen.
Either “D“ or “C“ will be flashing. This flashing indicates which part of the cycle is
currently being executed.
Once the cycling process is complete, the screen will read “END: CYCLE” and the
charger will emit a chiming sound. The X2 AC Pro will display the charge/discharge
capacity for each cycle. Using the
+
and
▬
buttons, you can scroll through this data
for each cycle.
Additional NiCd/NiMH Process Information:
During the NiCd/NiMH battery charging/discharging process, the X2 AC Pro can
display a variety of information, using the
+
or
▬
buttons you can also view the
following information:
Delta Peak
Input Voltage
sensitivity setting
External*/ internal
Temperature
temperatures
cut-off
Safety timer
Capacity cut-
setting
off setting
*Requires optional temperature sensor. (Part#: 44159)
Pb (Lead-Acid):
This program is only suitable for charging Pb (lead-acid)
batteries with nominal voltages of 2 to 20V. A Pb (lead-
acid) battery is significantly different from NiCD/NiMH batteries. Pb batteries can
only deliver current lower in comparison to their capacity. The same restriction
applies to the charging process. Consequently, the optimum charge current
can only be 1/10 of the capacity. A Pb battery cannot be used for fast charging.
Please follow the instructions provided by the battery manufacturer.
The X2 AC Pro offers the following Pb charge modes: Charge and Discharge.
NiMH 0.5A 9.6V
D > C 00086
NiMH Sensitivity
D.Peak 4mV/CELL
In Power Voltage
12.56V
Ext. Temp ----
Int. Temp 37
.
C
Temp Cut-off
50
.
C
Safety Time
ON 200min
Capacity Cut-Off
ON 5000mAh
BATT/PROGRAM
Pb BATT
Pb Lead-Acid Battery Program
