19
Lithium Battery Program
[LiP0/LiHV/LiFe/Lilon cont.]
See page 12 for the appropriate charging connections setup for this operation.
First, select the correct battery type by following the
instructions on page 16. Once you have set the correct
battery type, press the
►
button once to enter the charge mode and battery
settings screen, use the INC.
▬
or DEC
+
to select a “CHARGE” mode. Press the
►
button again and the amperage value will begin flashing. Use the
+
or
▬
buttons to adjust the value to the desired charge rate. Follow the instructions
provided with your battery when setting the charge amperage rate.
Press the
►
button again and the voltage value will begin flashing. Use the
+
or
▬
buttons to adjust the value to the desired rate. The voltage and cell count
should match the values listed on the battery label.
You are now ready to begin charging. Press and hold the
ENTER/Start
►
button until you see “BATTERY CHECK,”
followed by the “CONFIRM (ENTER) / CANCEL(STOP)“
screen. The “CONFIRM/CANCEL“ screen displays the
number of cells detected by the processor as ”R” and the number of cells you set
as “S”. If both numbers are identical, you may press and hold the ENTER/Start
►
button to confirm and begin charging. If these numbers do not match, press the
BATT/PROG Stop
■
button to return to the previous screen and carefully check
the number of cells of the battery pack before proceeding.
DURING CHARGING/DISCHARGING, THE BATTERY SHOULD BE PLACED
INSIDE A FIRE PROOF/RETARDANT BAG AND ON A FIRE PROOF SURFACE
AWAY FROM OTHER COMBUSTIBLE OBJECTS.
Once charging has commenced, the charger will display
the following real-time information: battery type/cell
count, charging current, battery voltage, charging time and charged capacity.
To view the voltage of each individual cell charging, press the
+
button. You can
also view a variety of other information as detailed later in this manual.
Once the battery is fully charged, the screen will read
“FINISHED” and the charger will emit a chiming sound.
Press the
■
button to return to the setup screen. You may also press the
■
button at any time during the charging process to stop charging.
LiPo BALANCE
2.7A 11.1V (3S)
R:3SE R S:3SER
CANCEL(STOP)
R:3SE R S:3SER
CONFIRM(ENTER)
Caution
LP3s 2.7A 11.88V
BAL 005:39 00256
4.07 4.06 4.11V
0.00 0.00 0.00V
