manualshive.com logo in svg

Hitachi VSP G130, Installation Manual

Share
Download
Hitachi VSP G130 Installation Manual Download Page 21

Option

■

DNS Domain Name: IP address of

the DNS server that will perform

address resolution.

■

DNS Search Order: Search domain

names. Use the Up and Down

buttons to order the domain names.

■

Maintenance Port: Do not change

these values.

■

Internal Network: Do not change

this value.

7. Click Apply.
8. When prompted that the initial settings are complete, click Close.

Next steps

(Optional) Configure syslog and SNMP notifications.

Configure syslog and SNMP notifications

Before you begin

Make sure the storage system is connected to your production network.

Procedure

1. In the navigation tree of the maintenance utility, under Administration, click Alert

Notifications. Then click Set Up in the Alert Notifications pane on the right.

Note: Although a tab is provided for configuring email notifications, we

recommend that you set up email notifications using Hi-Track Remote

Monitoring system.

Configure syslog and SNMP notifications

Installing your storage system that includes an SVP

Hitachi Virtual Storage Platform G130 (with SVP) Installation Guide

21

Summary of Contents for VSP G130




























Reviews:

No comments

Brands by name

Popular brands

Load more brands