Setting
Description
Protocol
IP addressing method to be used for
configuring the storage system.
MAC Address
Read-only field that shows the MAC
address for controllers 1 and 2.
IPv4 Configuration/ IPv6 Configuration
■
IPv4 Address: IPv4 address of the
production network to which the
storage system is connected (IPv4
only).
■
IPv6 Address: IPv6 address of the
production network to which the
storage system is connected (IPv6
only).
■
Subnet Mask: IP address mask that
identifies the range of IP addresses
in the subnet to which the storage
system is connected.
■
Subnet Prefix Length: Subnet prefix
length of the network to which the
storage system is connected (IPv6
only).
■
Default Gateway: IP address of the
default gateway to which the storage
system is connected. The gateway is
the IP address of the router used to
communicate outside the local
subnet.
■
DNS Server 1-3: If your
configuration uses DNS to resolve IP
addresses (for example, the IP
address for the NTP server used with
the storage system), enter up to
three DNS IP addresses.
Network Connection Mode
Determines whether the storage
system negotiates the speed and
duplex mode automatically with the
attached device. The default setting
(Auto-Negotiation) connects the
storage system at the highest speed
and appropriate duplex setting
supported by itself and the connected
device.
Running the Initial Setup wizard
Installing your storage system that includes an SVP
Hitachi Virtual Storage Platform G130 (with SVP) Installation Guide
20
