manualshive.com logo in svg

Hitachi VSP F400, System Administration Manual, Page: 405 / 414

Share
Download
Hitachi VSP F400 System Administration Manual Download Page 405

virtual volume (V-VOL)

A logical volume in a storage system. A V-VOL has no physical storage
space.

Thin Image uses V-VOLs as secondary volumes of copy pairs.

In Dynamic Provisioning, Dynamic Tiering, and active flash, V-VOLs are
called DP-VOLs.

VLUN

Hitachi Virtual LUN

VM

volume migration; volume manager

volume (VOL or vol)

A logical device (LDEV), or a set of concatenated LDEVs in the case of
LUSE, that has been defined to one or more hosts as a single data storage
unit. An open-systems volume is called a logical unit (LU), and a
mainframe volume is called a logical volume image (LVI).

volume shredding

Deleting the user data on a volume by overwriting all data in the volume
with dummy data.

Glossary

405

System Administrator Guide for VSP Gx00 models and VSP Fx00 models

Summary of Contents for VSP F400































































































































































































































































































































































































































Reviews:

No comments