Hitachi VSP F400, System Administration Manual, Page: 224 / 414

3. In the folder where the HTTP setting tool is located, execute the following
command:
C:\MAPP\wk\Supervisor\MappIniSet>MappHttpRelease.bat
4. A completion message box displays. Press any key to acknowledge the
message and close the message box.
5. Close the command prompt window.
Blocking HTTP communication to the SVP
If the web server supports SSL (HTTPS), you can use the HTTP setting tool to
block or allow access to the HTTP communication port as needed.
Before you begin
• You must have the Storage Administrator (Initial Configuration) role to
perform this task.
• You must be logged into the SVP.
Procedure
1. Close all Device Manager - Storage Navigator sessions on the SVP.
2. Open a command prompt window with administrator permissions.
3. In the folder where the HTTP setting tool is located, execute the following
command:
C:\MAPP\wk\Supervisor\MappIniSet>MappHttpBlock.bat
4. A completion message box displays. Press any key to acknowledge the
message and close the message box.
5. Close the command prompt window.
Setting up authentication and authorization
An authentication server enables users to log in to Device Manager - Storage
Navigator with the same password as the password that they use for other
applications. The authentication server must be configured for each user.
The following figure shows the login workflow without an authentication
server:
224 Setting up security
System Administrator Guide for VSP Gx00 models and VSP Fx00 models