Hitachi VSP F400 System Administration Manual Download Page 250

Page: 250 / 414

SNMP settings

Procedure

Click the

SNMP

tab.

SNMP Agent

, click

Enable

to use the agent or

Disable

not to use it.

Trap Destination

, click the type of address to send the SNMP trap

information:

Community

Public.

Click

Add

to add an SNMP trap address.

Community

, create a new community name or select an existing one.

Send Trap to

, enter a new IP address or select an existing one.

Click

to save the information and close the dialog box.

Sending test messages

The lower section of the

Alert Notifications

window contains three tabs:

Email, Syslog, and SNMP. Select the desired tab to send a test message of

the type specified in the tab name.

250

Alert notifications

System Administrator Guide for VSP Gx00 models and VSP Fx00 models

Summary of Contents for VSP F400































































































































































































































































































































































































































Search results

Summary of Contents for VSP F400

Reviews:

Hitachi VSP F400, System Administration Manual, Page: 250 / 414

Search results

Summary of Contents for VSP F400

Reviews: