DATE/TIME SETTING
23
NOTE:
The date/time graphics will be recorded whenever they appear in the viewfinder.
To record date/time graphics
Press the "
DATE
" button repeatedly to select the required date/time graphics in the viewfinder,
then strat recording.
• The display changes in the following order each time the "
DATE
" button is pressed.
NOTE:
Refer to page 29 for setting the second clock.
To correct date/time after starting the date/time
1. Press and hold "
DATE
" button, and then press "
STOP
" button. The month starts flashing.
2. Correct the incorrect digit by using "
F.FWD
", "
REW
" and "
STOP
" buttons.
To correct date/time during programming
1. Press "
STOP
" button repeatedly until the flashing cursor will be removed from the viewfinder.
2. Follow steps 1 and 2 of "
To correct date/time after starting the date/time
" above.
