5
English
Power switch
Remaining battery power indicator switch
Remaining battery power is FULL.
Remaining battery power is HALF.
Remaining battery power is LOW and should be
recharged as soon as possible.
Warning
STANDARD ACCESSORIES
In addition to the main unit (1 unit), the package contains the
accessories listed in the below.
○
USB adapter (BSL18UA(SA)) ..................................... 1
Standard accessories are subject to change without notice.
The previous BSL18UA model USB adapter cannot be
used. (The shape of the DC12V output port is di
ff
erent.)
APPLICATIONS
This heated outerwear is intended to keep the body warm in
cold environmental conditions.
SPECIFICATIONS
<UJ18DSL>
Size
XS, S, M, L,
XL, XXL, XXXL
Rated input
12V DC / 1.4A
Rated output
16.8 W
ON/OFF and heating stage
switches
2 (independent front
and rear)
Heating stages
Manual
High, Medium, Low
Auto
Fast heating
(immediately after
power-on only)
<BSL18UA(SA)>
Battery (sold separately)
BSL 14xx / BSL 18xx
Input voltage
14.4 / 18 V
Li-ion battery
Output port
USB output x 2
(5V, total 2A)
DC12V output x1
(2A)
Remaining battery power indicator
3 stages
Battery overdischarge protection
Yes
Auto power-o
ff
time
120 minutes
External dimensions (LxWxH)
(battery not included)
92 x 75 x 56 mm
Weight (battery not included)
150 g
NOTE
Due to HITACHI’s continuing program of research and
development, the speci
fi
cations herein are subject to
change without prior notice.
Hours of continuous use (example)*
1
(when fully charged)
Battery Voltage (V)
18
14.4
Battery capacity*
2
(Ah)
1.5
6.0
1.5
6.0
Heating
stage*
3
High
approx. 1.6
Hours
approx. 6.5
Hours
approx. 1.3
Hours
approx. 5.2
Hours
Medium approx. 2.4
Hours
approx. 9.5
Hours
approx. 1.9
Hours
approx. 7.5
Hours
Low
approx. 4.5
Hours
approx. 18
Hours
approx. 3.6
Hours
approx. 14.4
Hours
*1 Hours of continuous use will vary depending on factors
such as battery type and usage.
*2 indicates nominal values
*3 when front and rear are in the same mode
MOUNTING AND OPERATION
Action
Figure
Page
Removing and inserting the battery
7
78
Switch operation (USB adaptor)
8
78
Remaining battery power indicator
*1
9
78
Connection of a heated outerwear
and the USB adapter
10
78
How to use hook of USB adaptor
11
78
Switching between the High (Fast
heating mode) heating stage and
OFF
12
78
Set heating stages
13
79
Switching from the High, Medium or
Low heating stage to OFF
14
79
Selecting accessories
―
80
*1) The lamp will turn o
ff
several seconds after the remaining
battery power indicator switch is released.
CAUTION
• Ensure that the battery and power plug are inserted
fi
rmly into the USB adapter. If they are not
fi
rmly inserted,
there is a risk of unexpected accidents.
NOTE
• When switching on, the High (fast heating mode) stage
is always set.
If no changes are e
ff
ected to the heating stages, the
heating output is automatically reduced to the medium
heating stage after approx. 5 minutes.
<BSL18UA(SA)>
NOTE
• When the battery has been installed to the unit, the
remaining battery power indicator lamp will light up when
the switch is pressed.
• To prolong the life of the lithium-ion battery, the product
features a protection function that cuts o
ff
power output
when the battery voltage is low. As a result, the light will
suddenly switch o
ff
when the battery voltage is low.
Recharge as soon as possible.
• To prevent the light from being left unattended and
switched on, the product features an automatic power
shuto
ff
function that automatically switches o
ff
the power
after 120 minutes has elapsed. To continue use, press
the switch once again.
0000Book̲UJ18DSL.indb 5
0000Book̲UJ18DSL.indb 5
2016/12/27 9:20:21
2016/12/27 9:20:21
