Hitachi TD61-2472 User Manual Download Page 69 | Manualshive

Page: 69 / 72

background image

Safety Information

This safety information applies to the WIRELESSIP5000 telephone. Please read the section
below before installing or using your WIRELESSIP5000.

1.23.Warning about emergency services

Since the WIRELESSIP 5000 utilizes a communications network that is dependent on

commercial power supply, during a power failure, it can not access emergency services. Use
some other means to access emergency services.

1.24.Warning about explosive gas

Do not use the WIRELESSIP5000 anywhere dangerous, such as in an area with explosive gas in
the air. Verify safety with qualified personnel before using a wireless device in such an
environment.

1.25.Warning about the impact of electromagnetic signals

Since the WIRELESSIP5000 uses wireless signals, there is a danger of it affecting nearby
electronic equipment. Do not use the WIRELESSIP 5000 near medical equipment or anywhere
that use is prohibited.

1.26.Warning about battery handling

Do not dispose of the battery pack in fire or water. The battery could explode in a fire.

1.27.Battery safety items



Do not disassemble the battery pack, hit it, drill a hole in it, or incinerate it.



Failure to observe these precautions can result in fire, explosion, and injury. Do not touch
anything metal to the battery terminals.



Be particularly careful with any battery that is damaged or leaking. If you come in contact
with the battery fluid, wash that location well with plenty of soap and water. If any battery
fluid should get into your eyes, wash your eyes out with water for about 15 minutes and
seek medical attention.



Do not charge the battery if the ambient temperature is over 40 C.

˚



Do not store the battery anywhere that the temperature goes over 60 C.

˚



When disposing of a used battery pack, consult a local waste processing contractor and
follow all laws concerning disposal and recycling.



To replace the battery, contact your local sales store. Use a battery specifically designed for
the WIRELESSIP5000.



Use the AC adaptor manufactured specifically for the WIRELESSIP5000.

Hitachi Cable

65

«
...
67
68
69
70
71
...
»

Summary of Contents for TD61-2472









































































Reviews:

No comments

Related manuals for TD61-2472

Brand: Yezz Pages: 15

Brand: TCL Pages: 34

Brand: TCL Pages: 38

Brand: TCL Pages: 26

Brand: TCL Pages: 10

Brand: Sonim Pages: 1

Brand: Burnerphone Pages: 18

Brand: Shenzhen Pages: 57

Brand: Sony Ericsson Pages: 87

Brand: Sagem Pages: 58

Brand: Linear Pages: 8

Brand: Smartbox Pages: 84

Brand: IPRO Pages: 23

Brand: Haier Pages: 18

Brand: Haier Pages: 20

Brand: Haier Pages: 25

Brand: Haier Pages: 30

Brand: Haier Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands