11
StarBoard FX-79E2/89WE2
English
Contents
Notice Contents
Page(s)
- Select a level and stable position.
- Do not set it up near equipment that might generate electromagnetic waves
or
radio frequencies, such as radio transmitters, televisions, copying machines
or air
conditioners.
- Avoid locations that are dusty, that are subject to extremely high or low
temperatures or humidity, or that are exposed to direct sunlight.
P.1-6
Do not touch board at the time of plugging USB cable.
It may cause of malfunction.
P.1-12
Do not scrape or strike the board surface by stylus pen.
Failure to comply may result in damage on the board surface.
P.2-1
Use an input tool with a thickness of least 10 mm.
When inputting to this product, use a tool that is at least 10 mm. If a pen or
similar tool with a thickness of less than 10 mm is used, the input will be
unstable.
Also, do not use tools with a sharp tip, such as a ballpoint pen. If such a tool is
used incorrectly, it could damage the surface of the board.
P.2-1
NOTICE
Safe Handling