37
Care and Maintenance
Cleaning Auto dosing route for liquid detergents and fabric softeners
n
After cleaning the liquid detergent tank, fabric softener tank, and tank mounting part, it is recommended
to clean the liquid detergent and fabric softener route.
* Do not put clothes in the tub as water will
fl
ow into the tub.
How to clean liquid detergent route
Keep the faucet open.
1
Put hot water (about 40°C) in the cleaned liquid detergent tank
not over “FULL” position.
2
Start operation according to the following procedure.
*It is not possible to clean the liquid detergent route with this operation.
(1) Press
button to turn on the power.
(2) Press
button for 5 seconds or longer.
(3) Press
button and choose a time.
– Each time you press the button, “more” or “less” lights up, and the time is displayed on the
remaining time display.
If you frequently use Auto dosing function
Set “4 minutes course”
Ex)
If you do not frequently use Auto dosing function
Set “9 hours course”
Ex)
(4) Press
button to start operation.
After the set time has elapsed, a beep sounds and the power turns o
ff
automatically.
How to clean fabric softener route
Keep the faucet open.
1
Put hot water (about 40°C) in the cleaned fabric softener tank
not over “FULL” position.
2
Start operation according to the following procedure.
*It is not possible to clean the fabric softener route with this operation.
(1) Press
button to turn on the power.
(2) Press
button for 5 seconds or longer.
(3) Press
button and choose a time.
– Each time you press the button, “more” or “less” lights up, and the time is displayed on the
remaining time display.
If you frequently use Auto dosing function
Set “4 minutes course”
Ex)
If you do not frequently use Auto dosing function
Set “9 hours course”
Ex)
(4) Press
button to start operation.
After the set time has elapsed, a beep sounds and the power turns o
ff
automatically.
* After cleaning, remove the liquid detergent tank or fabric softener tank, discard any remaining water,
and wipe o
ff
the water with a soft cloth.
