35
Care and Maintenance
Cleaning Auto dosing part (Detergent/Softener Tank) and Tank mounting part
n
Clean the Auto dosing part in the following cases.
– In case of no maintenance for 2-3 months.
– When changing the type of liquid detergent or fabric softener.
– When the Auto dosing function is not used for more than one month.
– When dirt remains on the tank mounting part.
– When leaving the lid of the Auto dosing part open or when the remaining amount is low.
– When the liquid detergent or softener in the automatic dosing tank become jelly-like.
* Please be careful not to get your
fi
nger or hands caught when opening or closing the tank lid.
1
Hold the handle of the liquid detergent
tank or fabric softener tank and pull it
up to remove it.
When pulling up the liquid detergent tank
or fabric softener tank, the liquid detergent
or fabric softener may drip on the bottom
mounting part of the tank. Wipe it o
ff
with a soft
cloth.
Ex) In the case of a liquid detergent tank
Softener tank
Handle
Tank mounting part
Liquid detergent tank
Tank mounting part
2
Clean Tank cover and Indicator piece
(1) Hold the tank and remove Tank cover while
gently opening the knob on the tank cover.
(2) Push Indicator piece from the back of Tank
cover to remove it.
(3) Clean Tank cover and Indicator piece
– Rinse until there is no foaming or
sliminess.
– If it is very dirty, soak in hot water (about
40°C) for about 10 minutes or more and
rinse it.
– After rinsing, wipe it o
ff
with a dry cloth or
let it air dry.
* If the inside of the indicator piece becomes
dirty
– Use the knob to remove the case and
cover.
Please be careful not to get injured as it is
hard and does not come o
ff
easily.
– Gently wipe o
ff
any water droplets on the
case with a damp cloth.
– Do not rub strongly as the yellow indicator
sticker may come o
ff
.
(1)
Tank cover
Knob
(2)
Indicator piece
Push
(3)
Cover
Case
Push up the knob from
below (It is hard and does
not come o
ff
easily)
