14
How to Use the Washing Machine
5
Put detergent into the detergent dispenser and close the lid
(When using the Auto dosing function, see page 16)
n
Open the detergent dispenser, add the amount of detergent shown on the package, and then
close the detergent dispenser.
n
The amount of detergent is based on a type of “20-gram per 30-liter”.
Since the required amount of detergent varies depending on the type of detergent, follow the
instructions on the package of detergent.
n
For liquid detergent, follow the instructions on the package and add it to the liquid detergent/
liquid bleach dispenser.
n
Add softener to the softener dispenser according to the instructions on the package of softener.
Then, softener shall be added to the tub automatically in the
fi
nal rinse.
n
For liquid bleach, follow the instructions on the package and add it to the liquid detergent/liquid
bleach dispenser.
n
The speed that the lid closes may vary, depending on the temperature; however, this is not an
abnormality.
Pausing a program:
Press the Start/Pause button. The washing machine will switch
itself o
ff
if it is not restarted within 24 hours.
Adding clothes partway
through a program:
Press the Start/Pause button to pause operation and add your
clothes. The lid is locked while the tub is spinning, so wait
until the tub stops completely and the lid lock is automatically
released. After adding the clothes, close the lid and press the
Start/Pause button to restart the operation.
* Note: It is not recommended to add a large amount of clothes
as the washing machine
fi
rst measures the load size to
determine optimum operation.
Adding water partway
through a program:
Press the Shower Plus button to add water. To stop adding,
press the same button again. If the water level is already at the
maximum level, water cannot be added anymore.
* Note: This function cannot operate in the Tub Dry, Tub Clean,
Easy Refresh, Blanket, Hot Tub Clean and Water Save.
Changing strength of water
fl
ow:
Press the Water Power button.
You can repeatedly press the button to adjust the strength
through
fi
ve levels.
* Note: This function cannot operates in the Blanket, Energy
Save, Heavy, Small Load and Easy Refresh.
Depending on the program, maximum/minimum water power
you can change with this button is di
ff
erent. Also, when a load
amount is large, changes of water strength might not always
visibly distinctive.
Terminating a program:
Press the Start/Pause button, then press the Power button to
turn o
ff
the power.
