C
OVERING
C
ALLS
S
ELEC
S
ET
900 U
SER
G
UIDE
2-38
HCXTD850, Rev. A02, August 2001
Cover all calls
Occasionally you may want to send all of your calls to
another extension number or to the voice messaging
system. You can use the cover all calls feature to send all
of your calls to the designated coverage point. Calls are
sent to the coverage point that you specify for cover
busy/no answer immediately, so that your station does not
ring.
Note that you must perform the setup for cover busy/no
answer prior to invoking cover all calls. See
“Cover
busy/no answer”
on page 2-36.
Setting up
cover all calls
To activate cover all calls, follow these steps:
1
Press the <COVR> key or...
2
Lift the handset or press <SPKR>
and enter the cover all calls-register
feature
access
code.
3
Listen for confirmation tone.
4
All calls go directly to the station you specify for
cover busy/no answer. No calls ring at your phone.
Displaying
your coverage
settings
You can display the coverage settings you have registered
in two ways:
• By pressing the <DISPLAY> key and then the
<COVER> key (if cover all is assigned to an autodial
key)
• By using the soft key menu to display coverage points
(see
“Displaying coverage settings from the soft key
menu”
on page 4-12)
Summary of Contents for SelecSet 900 Series
