U
SING
B
RIDGED
CAP
S
HCXTD850, Rev. A02, August 2001
2-33
Using Bridged CAPs
Procedure
To create a three-party conference using bridged CAPs:
1
You receive an incoming call or make an outgoing
call on your first available CAP (in this case, CAP1).
2
When a second call comes in, place the first caller on
hold by pressing either a hold loop or the <HOLD>
key. Answer the second call on CAP 2 or make
another outgoing call on CAP2.
3
Press the <CONF> key to place the second caller on
consultation hold.
4
To conference CAP 1 with CAP 2, press the CAP 1
key. This keeps the caller on CAP 2 on consultation
hold and lets you talk with the caller on CAP 1.
Notify the caller on CAP 1 that he or she is about to
be conferenced, and with whom.
5
Press the <CONF> key a second time to make a
three-way conference. When you press the <CONF>
key again, only one CAP is in use (CAP2)—which is
where the conference resides.
You must remain in the conference unless at least one
of the conferenced members is an internal party to
prevent trunk-to-trunk lockup. You can remove
yourself from the conference if an internal party is
connected with an outside party.
6
If your system administrator has set up your phone
system with the multiparty conference capability, you
can place a conference on hold after connecting the
two parties on CAP 1 and CAP 2. You can then take
another call by pressing the <HOLD> key.
Summary of Contents for SelecSet 900 Series
