Hitachi S10Mini SV.Link, Hardware Manual, Page: 46 / 75

4 USER GUIDE
- 36 -
(6) Status display/control register and local station (S10mini) transmission/reception start area
settings
The table below shows the settings for specifying the local station areas:
Setting
Low-order word (register number)*1
Register name Category (bit/word)
High-order word
Minimum value Maximum value
X Bit H5820 H0000 H0FF0
Y Bit H5920 H0000 H0FF0
J Bit H4A20 H0000 H0FF0
Q Bit H5120 H0000 H0FF0
R Bit H5220 H0000 H0FF0
M Bit H4D20 H0000 H0FF0
K Bit H4B20 H0000 H0FF0
G Bit H4720 H0000 H0FF0
E Bit H4520 H0000 H0FF0
DW Word H4457 H0000 H0FFF
FW Word H4657 H0000 H0BFF
*1 When setting a bit register, be sure to select a setting of 0 for the lowest digit of a register number.
If a setting of other than 0 is selected, a parameter setting error occurs.
Example: The setting for "DWA00" selection is H44570A00.
(7) Remote station (MELSEC) write/read start area settings
The table below shows the settings for specifying the remote station areas:
Setting
Low-order word (register number)*1
Register name Category (bit/word)
High-order word
Minimum value Maximum value
X Bit H5820 H0000 H07F0
Y Bit H5920 H0000 H07F0
M Bit H4D20 H0000 H07F0
B Bit H4220 H0000 H0FF0
F Bit H4620 H0000 H07F0
D Word H4420 H0000 H17FF
W Word H5720 H0000 H0FFF
R Word H5220 H0000 H0FFF
*1 When setting a bit register, be sure to select a setting of 0 for the lowest digit of a register number.
If a setting of other than 0 is selected, a parameter setting error occurs.