●
Display when warning or fault was generated 9-6
No.
Message
Meaning of message
Remedy
54
Print Data
Changeover In
Progress S
A print operation was requested while the
print data was being changed.
●
Set to "Disable" for item
"Print data changeover" in the
User environment setup
screen.
●
Change the print data change
timing or the print process
start timing.
56 Blank Print Items
All the print contents are not set up.
●
Review the setup of print
contents and ensure that there
is no entirely invalidated line.
57
Excessive Format
Count
The number of print format types exceeded
8.
●
Perform setup so that the
number of print format types
does not exceed 8.
58
Print Data
Changeover In
Progress M
A print operation was requested while the
print data was being changed.
●
Set to "Disable" for item
"Print data changeover" in the
User environment setup
screen.
●
Change the print data change
timing or the print process
start timing.
59
Print Data
Changeover In
Progress V
A print operation was requested while the
print data was being changed.
●
Adjust the encoder signal
speed.
●
Set to "Disable" for item
"Print data changeover" in the
User environment setup
screen.
●
Change the print data change
timing or the print process
start timing.
60
Communication
Buffer Fault
At communication buffer function, the
number of contents received by buffer
became the specified number or less.
.
●
Adjust the print and
communication timing.
62
Internal
Communication
Error C
Data processing within the engine section
is faulty.
●
Turn the power OFF and then
back ON.
63
Internal
Communication
Error M
Data processing within the engine section
is faulty.
●
Turn the power OFF and then
back ON.
Summary of Contents for RX
Page 188: ...2 J0808 2C ...
