Hitachi RAC-P25YHAB, Manual

Page: 21 / 65

AIR SLEEP OPERATION
With motion sensor, the air conditioner detects movement, its location and temperature around people to control
set temperature and control fan speed to provide comfortable and energy saving operation as well as to achieve
comfortable sleep environment.
■
To start Air Sleep operation
Press (Air Sleep) button during operation.
• “ ”, “ ”, “ ” and number of hour are displayed of hour
are displayed on the remote controller display.
• During Air Sleep operation, fan speed will be Low.
• A beep sound emitted from indoor unit after Air sleep signal is sent.
• Select the desired temperature with Room Temperature setting
button (the display indicates the setting.
• The range of 25°C - 28°C is recommended as the room temperature
for comfortable sleep.
■
Adjusting Room Temperature
■
To cancel Air Sleep operation
Press (Start/Stop) button.
•
Press button.
from the remote controller display.
• Pressing (Air Sleep) button again until “ ” disappears
Press
button.
and “ ” appears on remote controller display.
• Pressing (Powerful) button until “ ” disappears
Press button.
• Pressing (Mode) button again until “ ” disappears
from the remote controller display. Mode will appear as per user’s selection.
•
•
•
•
•
•
1
2
With the motion sensor, the air conditioner can monito the activity level or sleep is confirmed.
The temperature will be increased automatically 1°C and the unit will continue running for 1 hour.
Fan speed will be changed to Silent.
If the condition of activity in the room stable, the unit will continue running with the temperature increased
another 1°C
Later if there is an increased of temperature detected the fan speed will change to LOW automatically.
If there is only smallactivity is confirmed,the temperature will decrease 1°C
Analyze position of human & surrounding for air blow operation direction.
If big human activity is detected, the temperature Fan Speed will be resumed back to previous setting
Sleep
Wind Mode F.Wash
- 21 -