Hitachi RAC-P25YHAB Manual Download Page 59

Page: 59 / 65

TROUBLESHOOTING

Filter cleaning is
performed after the
power is turned on
(after the circuit
breaker is switched
on or after power
failure)

• This is for filter cleaning operation check.

Filter cleaning
operation does not
start

( (FILTER CLEAN)

• During filter cleaning operation or within 5 minutes after the operation , the filter

cleaning operation will not restart to protect the device.

( (FILTER CLEAN) indicator lit for 1 second/off for 1 second, for 10 seconds)

• Is “filter cleaning operation prohibited” being set?

Please return to the filter cleaning operation setting.

• Are the micro mesh stainless filter, the dust catcher correctly installed?

( (FILTER CLEAN) indicator lit for 4 seconds/off for 1 second)

• Filter cleaning is not performed if the air conditioner operation is stopped by Sleep

Timer or Off Timer function. However, if the air conditioner is stopped by Sleep Timer

or Off Timer every time, filter cleaning will be performed approximately once a week.

Noise occurred
during filter
cleaning operation

• A whirring motor noise is generated due to driving of the cleaning unit.
• A sweeping sound is generated when the cleaning unit sweeps the dust.

Cleaning unit stops
halfway

•

( (

) indicator lit for 4 seconds/off for 1 second)

Micro mesh
stainless filter is
still dirty

• Filter may not be cleaned evenly depending on the environment in which the air

conditioner is used. To solve this problem, clean the micro mesh stainless filter.

• Depending on dust amount, the micro mesh stainless filter may not be completely

cleaned by manual filter cleaning operation performed at your preferred time while

filter cleaning operation is prohibited.

FILTER CLEANING OPERATION

indicator blinks)

FILTER CLEAN

Are the micro mesh stainless filter, the dust catcher correctly installed?

- 59 -

Summary of Contents for RAC-P25YHAB


































































Search results

Summary of Contents for RAC-P25YHAB

Reviews:

Related manuals for RAC-P25YHAB

Brands by name

Popular brands

Hitachi RAC-P25YHAB, Manual

Search results

Summary of Contents for RAC-P25YHAB

Reviews:

Related manuals for RAC-P25YHAB

Brands by name

Popular brands