– 7 –
ENGLISH
AUTOMATIC OPERATION
■
The device will automatically determine the operation mode either COOL or DEHUMIDIFY, depending
on the initial room temperature.
1
Press the (START/STOP) button
●
Operation start with a “beep”.
Press the (START/STOP) button
●
Please make sure you have been selected the (Automatic) mode
by use the (FUNCTION) Button.
●
The fan speed selector does not work at this operation.
STOP
Press the (ROOM TEMPERATURE) button
●
Temperature setting change by 1
°
C for each 1 time press.
Up
Down
●
You can raise or lower the temperature setting by a maximum of
3
°
C.
●
The display does not indicate the preset temperature in the Automatic
mode. Device will receive the setting by a “beep”.
■
You can slightly adjust the room temperature.
1
°
C
°
C
▲
▲
■
CONDITION OF AUTOMATIC OPERATION
●
The selected mode of operation will not change during the operation even though the room
temperature change.
Over 27
°
C
COOL
16 ~ 27
°
C
FUNCTION
27
°
C
Slightly lower than the
room temperature
QUIET
FAN SPEED
HIGH at start, LOW after
the preset temperature is
reached
-
DEHUMIDIFY
-
INITIAL ROOM
TEMPERATURE (APPROX.)
TEMPERATURE
SETTING
HITACHI
°
C
HITACHI
°
C