Hitachi RAC-30CVP1, Installation Manual, Page: 10 / 18

– 10 –
}
FAN SPEED SETTING
● Every time you press the button, fan speed will change as the below sequence.
● COOLING : AUTO
[
HIGH
[
MED
[
LOW
CIRCULATION : (
[ [ [
)
NOTE
(Auto) : The FAN SPEED is HIGH at first and varies to MED or LOW
automatically when the preset temperature is reached.
●
DEHUMIDIFYING : LOW (FIXED)
: ( — )
When the room temperature is higher than the temperature setting: The device will dehumidify the room,
reducing the room temperature to the preset level.
When the room temperature is lower than the temperature setting: Dehumidifying will be performed at
the temperature setting slightly lower than the current room temperature, regardless of the temperature
setting. The function will stop (the indoor unit will stop emitting air) as soon as the room temperature
becomes lower than the setting temperature.
MANUAL OPERATION [Cooling
●
Dehumidify
●
Circulation]
■
Please use below condition when you want to set the function mode, room temperature and fan
speed by manually.
DEHUMIDIFYING
Room Temperature 16
°
C above
COOLING
Outdoor Temperature 22-42
°
C
1
OPERATION MODE SELECTION
●
Every time you press the button, the mode will change as the below sequence
(Auto)
[
(Cool)
[
(Dehumidify)
[
(Circulation)
2
ROOM TEMPERATURE SETTING
Up
Down
●
The cooling operation does not start if the temperature
setting is higher than the current room temperature.
°
C
Dehumidify 16~26
°
C
Cooling 25~28
°
C
■
Recommend Temperature
▲
▲
4
Press the (START/STOP) button
●
Operation start with a signal received sound “beep”.
Press the (START/STOP) button
●
As the settings are stored in memory in the remote control unit, you
only have to press the (Start/Stop) button next time.
STOP
HITACHI
°
C
HITACHI
°
C
HITACHI
°
C
HITACHI
°
C
3