
ENGLISH
– 13 –
HOW TO EXCHANGE THE BATTERIES IN THE REMOTE CONTROLLER
1
Remove the cover as shown in the figure
and take out the old batteries.
2
Install the new batteries.
The direction of the batteries should match
the marks in the case.
1. Do not use new and old batteries, or different
kinds of batteries together.
2. Take out the batteries when you do not use
the remote controller for 2 or 3 months.
=
!
CAUTION
TEMPORARY SWITCH
Use the temporary switch when operation can not be
done with the remote controller.
1. By pressing the temporary switch, the operation is
done in previously set operation mode.
When the operation is done using the temporary
switch after the power source is turned off and is
turned on again, the operation is done in automatic
mode.
2. When the operation is stopped or when the
operation is done with the remote controller again,
press the temporary switch once again.
POWER SWITCH
When you do not use the room air
conditioner, set the power switch to
“OFF”.
Push and pull to the
direction of arrow
about 7mm
about 7mm
Press
Press
Temporary Switch
emporary Switch
TEMPORAR
TEMPORARY SWITCH
SWITCH
POWER SWITCH
POWER SWITCH
Non-conductor Stick
Non-conductor Stick