– 67 –
4. Drain Pan Assembly
(1) Pull out the hook that fixed to the cabinet.
(2) Hold the drain pan at both end side, from the bottom side
turn it upward and take out the drain pan.
6. How to Attach the Front Cover
(1) Check that the drain pan is securely attached.
(2) After installing the front cover onto the unit, hook three
claws at upper side of the cover securely. Then, push the
centre of the front cover to lock the claws.
(3) Tighten the two screws.
(4) Connect the wire connector. Close the electrical cover.
(5) Install the filter.
(6) Slide the shafts of the right and left arms on the washable
panel along the steps to insert the shafts into the holes till
they stop. After checking that the shafts are securely
inserted, close the panel.
(7) Firmly insert the front panel arms by sliding along the
steps located at the main body.
(8) Slide the front panel locking mechanisms (left and right)
into the slots located at the main body, untill you hear a
clicking sound.
5 . Fan Motor
(1) Remove the scre
ZVWKDW¿
xed fan cover at the right side of
Evaporator.
(2) Hold the right side of Evaporator and pull toward you, take
out the hook at the bottom of fan cover.
(3) Remove the scre
ZWKDW¿
xed the fan motor support.
(4) Push the down side of Evaporator upward and remove the
hook of fan motor holder.
(5) Loosen the scre
ZWKDW¿
xed the fan and take out the fan.
(6) Take out the anti-vibration rubber at the left and right of
fan motor.
(7) Turn the fan motor forward and take out .
Push to lock the claws
Arm
Step
Slot
Slot
