Hitachi RAC-18WPB Service Manual Download Page 21

Page: 21 / 148

– 23 –

ENGLISH

How to copy and paste.

Editing the reservation schedule is easy by copying data from one day to

another day

Press

(WEEKL

Y) button to select Mode

or Mode B.

Press

(WEEKL

Y) button for about 3 seconds to start editing the

reservation schedule.

Press

(DA

Y) button to select a day of the week to copy

Press

(COPY/P

ASTE) button.

Then "P

ASTE" blinks on the display

Press

(CANCEL) button to cancel the COPY

mode. Normal

setting mode is activated.

Press

(DA

Y) button to select a day of the week to paste.

Press

(COPY/P

ASTE) button one more time to paste.

only

blinks on the display

o continue copying to other days, press

Then start from step 3.

After copy and paste completed, press

(SEND) button while

directing the remote controller towards the indoor unit for about 3 seconds.

imer lamp on the indoor unit will blink rapidly

After beep sound emitted from indoor unit,

TIMER lamp will light up.

Please ensure that the TIMER lamp lights up.

TIMER lamp does not light up, Press

(SEND) button again.

Reservation data will not change if

(SEND) button is not pressed.

Step 3: Copy and cancel the reservation schedule.

NOTE

If there is no reservation data, copying data from one day to another day cannot be done.

WEEKL

Y TIMER OPERA

TION

– 24 –

Step 3: Copy and cancel the reservation schedule.

How to delete WEEKL

TIMER data.

[Delete one program number reservation]

Press

(WEEKL

Y) button to select Mode

or Mode B.

Press

(WEEKL

Y) button for 3 seconds to start editing the reserva-

tion schedule.

Press

(DA

Y) button to select a day of the week to edit.

Press

to select program number

. Selected program number will

blink.

Press

(DELETE) button.

Reservation of selected program number

is deleted.

After deleting, press

(SEND) button while directing the remote

controller towards the indoor unit for about 3 seconds.

imer lamp on the

indoor unit will blink rapidly

After beep sound emitted from indoor unit,

TIMER lamp will light up.

Please ensure that the TIMER lamp lights up.

Reservation will not change if

(SEND) button is not pressed.

WEEKL

Y TIMER OPERA

TION

Summary of Contents for RAC-18WPB





















































































































































Search results

Summary of Contents for RAC-18WPB

Reviews:

Brands by name

Popular brands

Hitachi RAC-18WPB, Service Manual

Search results

Summary of Contents for RAC-18WPB

Reviews:

Brands by name

Popular brands