manualshive.com logo in svg

Hitachi RAC-18WPB, Service Manual

Share
Download
Hitachi RAC-18WPB Service Manual Download Page 105

(3) Do not detach or reattach the connectors while energized 

(2) Detaching and reattaching the board connector 

Do not under any circumstances detach or reattach the connectors while energized.  That would destroy the board 
components and fan motor.  For both the indoor and outdoor boards, ensure that the smoothing capacitor has discharged its 
electricity fully before you do your work.

The product comes equipped with many board connectors provided with lock mechanism.  Forcibly pulling any such part 
without unlocking it will destroy it.  Be on guard.  When reconnecting it, insert it securely all the way home.

All the receptacles for connecting tab terminals are with a locking mechanism.  Forcibly pulling any such receptacle without 
unlocking it will destroy it.  Be on guard.  
When reconnecting it, insert it securely all the way home.

Pinch the locking mechanism with your 
fingers and pull it out unlocked.

Other instructions

(1) Detaching and reattaching the receptacles for tab terminal 

·

Receptacle types and how to unlock them

Vertical (with a resin case) 

Hold the resin case and pull it out.

Mild resin cover

Horizontal (with a mild resin cover)
 
Hold the cancel button down on the 
mild resin cover while pulling it out.

Cancel button

Locking 
mechanism

105

Summary of Contents for RAC-18WPB





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands