–
10
–
AUTOMATIC OPERATION
The device will automatically determine the mode of operation COOL, or Dehumidify, depending on
the initial room temperature. The selected mode of operation will not change when the room
temperature varies. Set the current timer before start operation.
Press the FUNCTION selector so that the display
indicates the
(AUTO) mode of operation.
Press the
(START/STOP) button.
Operation starts with a beep.
Press the button again to stop operation.
■
As the settings are stored in memory in the remote
controller, you only have to press the
(START/STOP)
button next time.
1
START
STOP
• The selected mode of operation will not change during the operation even though the room
temperature change.
CONDITION OF AUTOMATIC OPERATION
You can raise or lower the temperature setting as
necessary by maximum of 3°C.
Press the temperature button and the
temperature setting will change by
1°C each time.
• “
” is displayed when the temperature higher than
the automatically set room temperature by 1°C is set.
• “
” is displayed when the temperature lower than the
automatically set room temperature by 1°C is set.
To change the fan speed.
Press the
(AUTO) button.
• Select “AUTO”, “LOW” or “SILENT”.
2
INITIAL ROOM
TEMPERATURE (APPROX.)
FUNCTION
TEMPERATURE
SETTING
FAN SPEED
HIGH at start, LOW after the
preset temperature is reached.
27°C
Cool
Over 27°C
Dehumidfy
22°C - 26°C
Same as
room temperature
LOW
RAS13EX9G_EN(1-10).p65
3/8/07, 2:42 PM
10
