manualshive.com logo in svg

Hitachi RAC-08LH1, Service Manual, Page: 17 / 76

Share
Download
Hitachi RAC-08LH1 Service Manual Download Page 17

– 15 –

 

  FAN SPEED (AUTO)

 

..... When the AUTO fan speed mode is set in the cooling/heating operation:

For the heating operation

●

 The fan speed will automatically change according to the temperature         

of discharged air.

●

 When the difference of room temperature and setting temperature is 

large, fan starts to run at HI speed.

●

 When the room temperature reaches setting temperature, fan speed 

changes to LOW automatically.

●

 When the difference of room temperature and setting temperature is 

large, fan starts to run at HI speed.

●

 After room temperature reaches the preset temperature, the cooling 

operation, which changes the fan speed and room temperature to obtain 
optimum conditions for natural healthful cooling will be performed.

For the cooling operation

FAN OPERATION

You can use the device simply as an air circulator. Use this function to dry the interior of the indoor 
unit at the end of summer.

Press the FUNCTION selector so that the display indicates 

     

    (FAN).

Press the    (FAN SPEED) button.

Press the     (START/STOP) button. Fan operation starts with 
a beep. Press the button again to stop operation.

1
2

START

STOP

RESET

Summary of Contents for RAC-08LH1













































































Reviews:

No comments