48
HOW TO REMOVE PARTS
Vegetable Compartment
Height adjustable upper and middle shelf
Fixed shelf
Height adjustable lower shelf
Chill room
●
Draw the door fully and pull up
the Spacious upper case as
shown in the fi gure.
●
Lift up the front part of the door,
and draw it further and incline it.
●
Lift up the Lower Case.
●
When installing it, insert the pins on the
left/right inner sides of the Lower Case
into the square holes on the frame, and
put the edge of the Lower Case on the
frame to install it.
When installing the shelf, slide it until it reaches to the interior wall, then slightly
lift up the back of the shelf and push it in. (hitch the forks of the shelf to the parts
on the back of the shelf)
●
Draw the shelf, and pull off
the two pins on the lower
right and remove it.
●
Slightly lift up and pull out.
●
Pull out the case to the full,
lift the front side slightly
and then remove it.
1
Slightly lift up the back
of the shelf and draw it.
Raise the shelf as shown in
fi gure, and turn it and remove it.
2
Door may damage if drawing the shelf without turning it.
Caution
1
2
3
Slide case
●
Make sure no stored items remain before removing a part.
●
Do not remove parts which are not described below.
Contact with a service center listed on the back cover for cleaning parts after removing them.
Notice
Frame
Summary of Contents for R-S42CMJ
Page 30: ...30 MEMO ...
Page 58: ...58 MEMO ...
