Hitachi R-S42CMJ, How To Use Manual

Page: 44 / 60

44
ICE COMPARTMENT
(AUTOMATIC ICE MAKER)
Setting of the Automatic ice
maker
Push the 製冰 (Ice Making)
button to turn on the
ყϕ
(Ice
Making) indicator lamp.
3
2
Add water line
How to make Ice Not making ice
(Stop Ice Making)
1 1
2
3
Setting of the automatic ice
maker
Push the
製冰
(Ice Making)
button to select
停止
(Stop) .
The automatic ice making function
becomes disabled which stops ice
making.
※ 給水 (Water Supply) remains
off when 停止 (Stop) is
selected for automatic ice
making.
Pg.45
Remove the water supply
container and wash it
thoroughly. Dry the container
completely.
(How to maintain Pg.50 )
Place the water supply
container.
The container should be pushed
in until it passes the
ņ
container
set position
Ň
line.
Take off the Water Supply
Container.
When the Water Supply
indicator lamp is lit or the water
level reaches to the Add water
line , replenish water.
Open the lid and add water.
Water level can not exceed
"Container-full line".
Replace the Water Supply
Container.
Push it beyond the "Container set
position" line.
※ Water may spill out if the
water supply container is
inclined. Wipe off spilled water
immediately.
Ice making starts
automatically and ice is
stored in the Ice case.
Container-full
line
4
Container set position Container set position
5
Perform
ყϕጠ଼ᇓ
(Ice Maker Cleaning) when making ice for
the fi rst time or for the fi rst time in a week or more. Pg.50
It may take 24 hours or more to make ice for the fi rst time.
8 pieces of ice cubes are usually made per 2
〜 3 hours.
Notice
●
Do not place your hand in the mechanical
section of the automatic ice maker.
(Rotation of the ice tray may cause injury.)
Warning
Control Panel
Ice Compartment
Ice Making buttons
AUTOMATIC ICE MAKER
Ice Tray
Water Supply Container
Ice Case
Ice scoop
Ice Making button
Light ON
Light ON
1 beep
2 beeps
Water Supply indicator lamp
Display
Ice Making button