37
Stickers
Left/Right
Plastic parts
Label
Such as old cloth
Before Use
4
5
On the Power Plug and Grounding
●
It is not a problem to plug in the power cord soon after installing the refrigerator.
●
Use a wall outlet exclusively when connecting the power cord. (Alternating current 110V, rated 15A or more)
Cooling down the inside of the refrigerator
●
It may take more than 4 hours to cool well the inside of the refrigerator, depending on conditions such as
the ambient temperature or the storage state of foods.
●
Perform
ყϕጠ଼ᇓ
(Ice Maker Cleaning) when using the automatic ice making function fi rst.
Pg.50
●
A series of ice making operation will start automatically after the inside of the refrigerator is cooled well.
(When using for the fi rst time, it may take 24 hours and more to make ice.)
●
Make sure to empty food and ice from the refrigerator. Always drain
water from the water supply container and ice tray.
●
Secure the door with tape.
●
Unplug the power plug and remove the ground lead, if it is connected.
●
Use a tape to fi x the power plug / cord so that they may not hang
down.
●
In preparation for transportation or at the destination, lay a protective
sheet or cloth to protect the fl oor from damage and catch remaining
water spilled from the refrigerator.
●
With a large piece of old cloth underneath, tilt the refrigerator
backward to drain water.
●
Make sure to hold the handles when carrying it.
●
See Preparation before use for installing the refrigerator in a new
location.
Pg.36
It is recommended to ground the refrigerator
to prevent possible electrical shock.
●
Contact your dealer to ground the refrigerator or install an earth
leakage circuit breaker if the refrigerator is installed in especially
damp and humid places.
●
Option: "Earth wire (2.5m)" (Parts No. NW-60R6 052)
●
Do not remove the sticker from the back of the refrigerator. This sticker is
necessary to secure the performance and safety.
●
Do not remove the plastic parts from the bottom part of the side of the
refrigerator.
●
If you wish to install the refrigerator in a hot spring area exposed to sulfi de gas, you may need to apply anti-rust treatment to the
piping. Contact your dealer in advance. Failure caused by sulfi de gas will not be covered under guarantee.
●
When a magnet or suction cup is attached on the side of the body or the surface of a door, it may leave a mark.
Never connect the earth wire to the following places:
●
Water pipe (Danger of electrical shock)
●
Gas pipe (Danger of explosion)
●
Telephone line or earth of lightning rod (Danger when lightning strikes)
Earth terminal
Earth installation screws
Earth wire
(Copper wire with diameter of
1.6mm)
Caution
Transporting your refrigerator (transport for moving)
Preparation for an earthquake has been made
properly?
●
It is recommended to fi x the refrigerator to a sturdy wall or pillar using
two safety belt to avoid overturning of refrigerators
.
●
Option: "Safety belt against overturning for refrigerators" (Parts No.
R-826CV 300: belt x 1) Contact your dealer for details.
Screw x 4
(attached to belt)
Belt
Summary of Contents for R-S42CMJ
Page 30: ...30 MEMO ...
Page 58: ...58 MEMO ...
