8
/
9
Attentions:
Press the “
ON
/OFF”
(1)
to start the green control box, press
(2)
“
” and “
” button to
adjust the temperature
SV (3)
( the heating temperature could be set to 380
℃
when
welding the HDPE).
1. Meanwhile press the
“
O
/
Ⅰ”
(5)
to start the heat gun, adjust the knob
(6)
to set heat
gun temperature and air volume ( for PVC rod welding: 5-6 grade, for HDPE rod welding
6-7 grade).
Pre-heating 30 second, the first lamp on panel
(4)
is turns to green means that the
temperature
PV
(real-time temp) is reach to
SV
setting temp, can start to weld.
When third lamp “
ALM1
” is light up means that the
PV (4)
temperature is reach to 300
℃
,
the extruder’s trigger
(8)
can start up.
2. Put the welding rod into suitable feed inlet
(7)
, press the motor trigger
(8)
. You could
adjust the motor speed by trigger too.
