manualshive.com logo in svg

Hitachi PW1L 28LD5200E, User Manual, Page: 26 / 56

Share
Download
Hitachi PW1L 28LD5200E User Manual Download Page 26

24

NOTES

About screen defects

• High precision technology is used in the making of LCD panels but there may be dark spots (points that do not illuminate) and bright spots

(points that are too bright) in some cases. These do not indicate a malfunction.

About residual images

• In some cases, residual images may remain after the short-term display of still images and another image is displayed, but these will

disappear and return to normal. This is not a malfunction.

About the panel screen

• LCD displays display images by illuminating phosphor inside the panel. Because of this, the temperature of the panel surface may rise in some
cases.Also, LCD displays are made of finely processed glass, so avoid strong impact because of danger of glass breakage.

About using in a low ambient temperature

• The response speed of LCD panel becomes slow as ambient temperature falls. This feature may cause residual images in some cases, but
this is not a malfunction. It will return to normal in a litlle while after the temperature becomes normal.

Summary of Contents for PW1L 28LD5200E

























































Reviews:

No comments