ENGLISH 31
Problems and remedies
CAUTION:
Check the following points before asking for repair assistance from
the service department.
Not operating
Battery is discharged.
Battery may be unseated.
Vacuum connection is
blocked.
Dust reservoir (11) is full.
You may have reached the
cleaning period of the filters.
Filters may be deformed as a result
of operation and their replacement
period may have come.
Motor inlet foam is not
cleaned.
Hair and similar materials may
have tangled on the rotating roll
on the turbo brush (8).
Vacuum connection is
blocked.
Something may have stuck between
the dust reservoir and the filter.
The vacuum cleaner is not
installed to the charging dock
(15).
It is not charged for the
adequate period.
Motor inlet foam is not
cleaned.
Battery life is deteriorated.
Your appliance is about to
discharged.
Hair and similar materials
may have tangled on the
rotating roll on the turbo
brush (8).
Battery is discharged.
Remove the battery and
install it again.
Separate the appliance as body
(10), brush (8) and wand (6). Inspect
and clean the connection points.
Clean the dust reservoir (11)
and the filter.
Clean the filters.
Please contact the customer
services to buy a new filter.
Clean the filters and
recharge the appliance.
Clean the turbo brush roll.
Separate the appliance as
body (10), brush (8) and
wand (6). Inspect and clean
the connection points.
Open the dust reservoir and
inspect the filter area.
Install the vacuum cleaner to
the charging dock (15). Make
sure that it is seated properly.
Check the connection.
Charge for 4-5 hours as per
the instructions.
Clean the filters and
recharge the appliance.
Contact the customer
services to buy a new battery.
Charge it.
Clean the turbo brush roll.
Suction power is reducing.
There is disturbing noise
from the motor.
Cannot charge the vacuum
cleaner.
Operates for a very short
time after charging.
The colour indicator on the
screen is illuminated in red.
The animation indicating that the
brush is blocked is displayed on
the screen and the appliance
has stopped operating.
PROBLEM
POSSIBLE CAUSE
SOLUTION
