34
Select services by using the Channel list instead of using
0
-
9
numeric
buttons or
P (
+/–
)
.
List of the services
Zoom window
Exit
Navigate
Enter
TV/Radio
V
T
t
s
i
l
l
e
n
n
a
h
C
Channel group
Carrier
crystal palace
Freq
177500 kHz
S.No Services
001 BBC ONE
002 BBC TWO
003 ITV1
004 Channel4
005 Five
006 ITV2
All
Channel group
Tuning parameters
1
Press
ENTER
when no other menu screen is displayed.
2
The screen shows the service list in either TV or Radio mode sorted by
favourite type (All, Fav1 - 4) as configured in
29
.
3
Press
ϳ
/
ϴ
to select the desired service, and then press
ENTER
.
The image shown in the picture window changes.
•
4
Press
EXIT
to exit the Channel list to watch the image in full screen.
USEFUL FEATURES (DTV) (continued)
Using the digital channel list
When the Timer is set, the TV automatically tunes to a preset TV event when its on-air time begins.
1
Press
GUIDE
.
Event Timer
Service Name Mode
Date
Time Duration
BBC ONE Once
26/02/02 8:10 00:23
Timer mode
Delete Timer
Edit Time
Edit Duration
Once
Daily
Weekly
Exit
Navigate
Enter
2
Press
ϳ
/
ϴ
/
ϵ
/
϶
to select the desired event to be preset from the Event
name list, and then press
ENTER
.
Select an event not yet started.
A confirmation message displays.
•
•
3
Press
ϵ
/
϶
to select “Yes”, and then press
ENTER
.
4
Press
RED
(Timer Mode), and then press
ϳ
/
ϴ
to select the desired
parameter (“Once”, “Daily” or “Weekly”), and then press
ENTER
.
5
To return to the Guide menu, press
MENU
.
To clear the menu screen, press
EXIT
.
If the unit goes to standby mode (by pressing
) after the EPG Timer has been set, the indicator on front of the unit will
blink in red. This is to indicate that an EPG Timer event has been set.
If the EPG Timer begins during standby mode, the
indicator on front of the unit will be lit in orange. This is to indicate
that an EPG Timer event has begun in standby mode.
•
•
NOTE
If using this function for recording, make sure to set the timer of your recording equipment as well.
Do not switch channels while recording using this function.
Up to 8 events can be preset using the Timer function.
You can choose whether or not the screen switches on when the timer event begins. See REC SCREEN STATUS on
26
. This
is so that if you are using the timer to make a recording to your VCR or other device, the TV screen will not switch on unless you
want it to.
If you are watching another event, an alarm message displays on the screen a few seconds before the preset time.
To cancel the preset, select the event to delete, press
GREEN
(Delete Timer), press
ϵ
/
϶
to select “Yes”, and then press
ENTER
.
An alert message displays when the preset events overlap one another.
To edit the preset, select the event to edit, press
YELLOW
(Edit Timer), and then press
ϳ
/
ϴ
to edit the Time. The start time can
be changed in 10-minute intervals.
Then press
ENTER
.
You cannot set as former time from the present time.
To edit the duration time, select the event to edit, press
BLUE
(Edit Duration), and then press
ϳ
/
ϴ
to edit the Time. The duration
can be changed in 10-minute intervals. Then press
ENTER
.
Press
GUIDE
twice to display the stored timer events.
•
•
•
•
•
•
•
•
•
•
Using the EPG Timer
