--- 29 ---
Fig. 22
Roll Pin D3 x 28 [60]
Trigger Spring [46]
Rod
(3 mm in dia.,19 mm in length)
Pushing Lever Guide [47]
Body [23]
Trigger unit
Mount the Trigger Spring [46] and the trigger unit to the Pushing Lever Guide [47] using a rod 3 mm diameter
and 19 mm long before mounting the trigger unit to the Body [23] for easier mounting.
Mount the Roll Pin D3 x 28 [60] facing its split upward.
10-4. Disassembly and Reassembly of the Magazine Section
(1) Disassembly and reassembly of the magazine section
(a) Disassembly (Fig. 24)
Loosen the Hex. Socket Hd. Bolt M5 x 20 [101] and
the Nylon Nut M5 [36] and remove the Sleeve [85].
Deform Pushing Lever Cover (A) [86] using a flat-
blade screwdriver and disengage it from the Nose
[27].
Loosen the Machine Screw M5 x 35 (Black) [65] of
the Body [23]. Then the magazine section and the
Hook [64] can be removed.
[Tools required]
Phillips screwdriver
Roll pin pullers (4 mm and 2.5 mm dia.)
4 mm hex. bar wrench
M5 wrench
Engaged.
Insert a flat-blade
screwdriver to deform
Pushing Lever Cover
(A) [86].
Roll Pin D3 x 28 [60]
Summary of Contents for NV 65AF3
Page 45: ......