4 4
QM00971-1
Operating
Operating
Adjusting the volume
Use the
/
-
buttons to adjust the volume.
A dialog appears on the screen to help you in adjusting
the volume. If you do nothing, the dialog automatically
disappears after a few seconds.
• When is selected for current picture input port, the volume
adjustment is disabled. See AUDIO SOURCE item of AUDIO menu (
91
).
• If the projector is in the standby mode, the volume is adjustable when both of
the following conditions are true:
- An option other than OFF is selected for AUDIO OUT in the STANDBY
OUTPUT item of the SETUP menu (
90
)
.
- NORMAL or QUICK START is selected in the STANDBY MODE item of the
SETUP menu (
87
).
• You cannot adjust the volume when ON is selected in OPTION - SERVICE -
AUDIO VOLUME LOCK.
Press
AV MUTE
button on the remote control.
The BLANK screen is displayed instead of the screen
of input signals and the sound is muted. Refer to the
BLANK item in SCREEN menu about the BLANK screen
(
93
).
To exit from the AV MUTE mode and restore the
screen and audio, press
AV MUTE
button again.
INFO
NETWORK INTERACTIVE
VOLUME
+ / -
buttons
INFO
NETWORK INTERACTIVE
AV MUTE
button
NOTE
NOTE
Temporarily turning off the screen and audio
• The projector automatically exits from the AV MUTE mode when
some control buttons are pressed.
• Refer to "Regarding the indicator lamps"(
131
) about the indicator when
Blank(black) or AV Mute(black) is on.
