14 2
QM00971-1
Troubleshooting
Issues that may be easy to be mistaken for machine defects (continued)
Issue
Cases not involving a machine defect
Reference
page
LAN does not
work, if LAN is
connected to
the projector
while having
an input signal
from HDBaseT.
Check if the LAN setting is HDBaseT.
EASY MENU > ADVANCED MENU >
OPTION>SERVICE>CONTROL TERMINAL > WIRED
NETWORK
–
This projector is compatible with 100BASE-T only
.
Check the specification of the connected equipments.
–
If the LAN cable is connected with the hub, try to change
the connected port at the hub.
–
If the LAN cable is connected directly to the computer,
try to connect to other computer.
–
No image is
displayed via
HDBaseT.
Check the LAN cable if it is CAT5e certified or higher.
–
Try to change the LAN cable.
–
If the LAN cable is connected with more than three
extension connector, the transmission of 100 meters
may fail.
–
Check if the extension connector is compatible with
CAT5e.
All LAN cable and extension connector connected with
HDBaseT
port must be CAT5e certified.
–
No image is
displayed via
3G-SDI.
Check if it is connected with a cable of 5CFB or greater,
or Belden 1694A or greater.
–
Check if a cable with a length of 100m or less is used.
–
Try to change the cable.
–
Check if a supported signal format is input.
–
(continued on next page)
