Server Priority Manager Operation
6-27
Hitachi Universal Storage Platform V/VM Hitachi Performance Manager User’s Guide
Figure 6-10
Change WWN and SPM Name Window
Replacing a Host Bus Adapter
If a host bus adapter fails, you will need to replace the adapter with a new
one. After you finish replacement, you will need to delete the old host bus
adapter from the
Server Priority Manager
window and then register the new
host bus adapter.
When you add a new host bus adapter rather than replacing an old one, the
WWN of the added host bus adapter is automatically displayed below
Non-
Monitor
for the connected port in the list.
Follow the procedure below to remove the old adapter and register a new
adapter quickly and easily.
To register a new host bus adapter after replacement:
1.
Start Server Priority Manager.
The
Server Priority Manager
window is displayed.
2.
Select the WWN tab.
3.
In the upper-left tree, select the old host bus adapter ( ) from below
Monitor
and then right-click the selection.
4.
From the pop-up menu, select
Change WWN and SPM Name
.
The
Change WWN and SPM Name
window is displayed.
5.
Enter the WWN of the new host bus adapter in the
WWN
combo box.
You can select the WWN of the newly connected host bus adapter in the
WWN
combo box. If you are using Windows, you can drag the WWN of the
new host bus adapter displayed below
Non-Monitor
and drop it to
Monitor
.
6.
If necessary, enter a new SPM name in the
SPM Name
box. You can use
up to 16 characters for an SPM name.
7.
Select
OK
to close the
Change WWN and SPM Name
window.
8.
In the
Server Priority Manager
window, click
Apply
.
The settings in the window are applied to the storage system.
