6-26
Server Priority Manager Operation
Hitachi Universal Storage Platform V/VM Hitachi Performance Manager User’s Guide
4.
Select
IOPS
or
MB/s
from the
All Thresholds
list, and do one of the
following:
–
To specify the threshold value by using the I/O rate, select
IOPS
from
the list below the check box.
–
To specify the threshold value by using the transfer rate, select
MB/s
from the list below the check box.
Even if the types of rates differ between the upper limit values and the
threshold value, the threshold control is effective for all the non-prioritized
WWNs.
5.
Enter the threshold in the text box of
All Thresholds
.
6.
Click
Apply
.
The settings in the window are applied to the storage system.
Changing the SPM Name of a Host Bus Adapter
The
Server Priority Manager
window allows you to assign an
SPM name
to a
host bus adapter (HBA). Although you can identify HBAs by WWNs (Worldwide
Names), you will be able to identify HBAs more easily if you assign SPM
names. WWNs are 16-digit hexadecimal numbers and cannot be changed.
However, SPM names should not necessarily be 16-digit hexadecimal numbers
and can be changed.
The following is the procedure for changing an already assigned SPM name.
For details on how to assign an SPM name, see Monitoring All Traffic between
HBAs and Ports.
To change an SPM name:
1.
Start Server Priority Manager.
The
Server Priority Manager
window is displayed.
2.
Ensure that the WWN tab is displayed.
3.
In the upper-left tree, select a host bus adapter ( ) from below
Monitor
and then right-click the selection.
4.
From the pop-up menu, select
Change WWN and SPM Name
.
The
Change WWN and SPM Name
window is displayed.
5.
Enter a new SPM name in the
SPM Name
box and then select
OK
. You can
use up to 16 characters for an SPM name.
6.
In the
Server Priority Manager
window, click
Apply
.
The settings in the window are applied to the storage system.
