GB - 18 -
programme names, you can change them in aps sub-
menu in the settings menu.
All the services are searched and a channel table is
created automatically.
All channels found are stored in a sorted form with
respect to their channel numbers. Some services
may not appear with the correct channel number. At
the time of printing, not all broadcasters are sending
their channel number information.
Manual Search:
In
Manual Search
, the number of the multiplex is
entered manually and only that multiplex is searched
for the channels. For every valid channel number,
signal level, signal quality and network name are
shown at the bottom of the screen.
In both manual and auto search any existing channel
in the database is not re-stored to avoid redundant
duplicates of that channel.
First Time Installation
The user can use this item to load default settings,
which had been loaded to the receiver at the factory.
To install factory settings, highlight
“First Time In-
stallation”
menu item and press
OK
button, then you
will be asked to tings. Selecting “Yes” by pressing
OK
button while the “Yes” is highlighted and then the
existing channel table will be deleted.
Are you sure you want to delete all channels and
settings for first time installation?
Yes
No
After factory settings is loaded, “
First Time Instal-
lation
” menu will be displayed.
The menu which is displayed for language selection
appears on the screen at first. By using
or
buttons, select the desired language option, and press
OK
button to activate.
After the language is selected, a message asking for
automatic search start appears on the screen.
Do you want to start automatic search?
Yes
No
Highlight “Yes” item by pressing
or
buttons and
press
OK
button to start installation. After search is
completed for digital channels, a message asking
search for analogue channels appears on the screen.
Yes
Do you want to search for
analogue channels?
No
Highlight “
Yes
” item by pressing
or
buttons and
press
OK
button to searh for analogue channels.The
following menu appears on the screen for analogue
channel search.
Country
Language
UK
Ok
Cancel
PLEASE CHECK ANTENNA CABLE
AUTO. PROGRAMMING SYSTEM
TXT Language
Auto Program
By pressing
or
button, adjust the
Country
item
and press
to highlight
Language
item. Use
or
button to set
Language
. Use
or
buttons to
select
TXT Language
and set it by using
or
buttons. Press
OK
button to continue.
Configuration
Press
button to display the Main Menu and the
button twice to highlight Configuration, then press
OK
button to display the Configuration menu. Press
button to exit the menu.
Main Menu
Channel List
Installation
Configuration
Timers
TV Setup
Common Interface
The various configuration functions are displayed in
a list, along with a quarter-screen image of the cur-
rently selected channel. You can select a function by
highlighting the corresponding menu line using the
or
buttons.
A01-IB-ENG-(L32H01E A)-MB22-PANEU-32810W-(RRC1001-2511E)-(BASIC PIP)-10051694-50111197-rev1.p65
09.07.2007, 12:30
18
