Hitachi KP-FM200WCL, Operation Manual

Page: 12 / 43

4
Connector
1. Camera Link connector
D.OUT1 (Connector 1)
Pin No. Signal Pin No. Signal
+12V (PoCL)
1
GND (non-PoCL)
14 GND
2 TXOUT 0 ( － ) 15 TXOUT 0 ( ＋ )
3 TXOUT 1 (
－
) 16 TXOUT 1 (
＋
)
4 TXOUT 2 ( － ) 17 TXOUT 2 ( ＋ )
5 TXCLKOUT (
－
) 18 TXCLKOUT (
＋
)
6 TXOUT 3 (
－
) 19 TXOUT 3 (
＋
)
7 RX ( ＋ ) [ SERTC ( ＋ ) ] 20 RX ( － ) [ SERTC ( － ) ]
8 TX (
－
) [ SERTFG (
－
) ] 21 TX (
＋
) [ SERTFG (
＋
) ]
9 TRIG( － ) [ CC1 ( － ) ] 22 TRIG ( ＋ ) [ CC1 ( ＋ ) ]
10 N.U. [ CC2 (
＋
) ] 23 N.U. [ CC2 (
－
) ]
11 N.U. [ CC3 (
－
) ] 24 N.U. [ CC3 (
＋
) ]
12 N.U. [ CC4 ( ＋ ) ] 25 N.U. [ CC4 ( － ) ]
+12V (PoCL)
13 GND 26
GND (non-PoCL)
D.OUT2 (Connector 2: used for Medium/Full configuration)
Pin No. Signal Pin No. Signal
+12V (PoCL)
1
GND (non-PoCL)
14 GND
2 TYOUT 0 ( － ) 15 TYOUT 0 ( ＋ )
3 TYOUT 1 (
－
) 16 TYOUT 1 (
＋
)
4 TYOUT 2 (
－
) 17 TYOUT 2 (
＋
)
5 TYCLKOUT (
－
) 18 TYCLKOUT (
＋
)
6 TYOUT 3 (
－
) 19 TYOUT 3 (
＋
)
7 100 Ω ( ＋ ) 20 100 Ω ( － )
8 TZOUT 0 (
－
) 21 TZOUT 0 (
＋
)
9 TZOUT 1 (
－
) 22 TZOUT 1 (
＋
)
10 TZOUT 2 ( － ) 23 TZOUT 2 ( ＋ )
11 TZCLKOUT (
－
) 24 TZCLKOUT (
＋
)
12 TZOUT 3 ( － ) 25 TZOUT 3 ( ＋ )
+12V (PoCL)
13 GND 26
GND (non-PoCL)
SDR connector (3M) or equivalent N.U.: Not used
- The digital out cable should be comprised of a twisted pair of wires having 100 Ω characteristic impedance and an
outer heath shield type conductor.
- Connect the shield (ground) of the digital out cable to the ground terminal of the video equipment, frame grabber, etc.
- TX: Transmit data from camera to machine
- RX: Transmit data from machine to camera
(Note) Please do not unplug and insert cable (digital out cable) with a power supplied to a camera.
2. DCIN/SYNC connector
PIN NO. Signal PIN NO. Signal
1 GND 7 Trigger IN
---- (PoCL)
2
+12V (non-PoCL)
8 GND
3 GND 9 ----
4 ---- 10 FLASH OUT / VD OUT
5 GND 11 ----
6 ---- 12 GND
Connector (camera side) : SNH-10-12(RPCB) SAMWOO or equivalent
Plug (matching cable plug) : HR10A-10P-12S(01) HIROSE or equivalent