Hitachi KP-F500PCL, Operating Manual

Page: 14 / 40

4
Connector
1. CameraLink connector
D.OUT1 (Connector 1)
Pin No. Signal Pin No. Signal
+12V (KP-F500PCL)
1
GND (KP-F500SCL)
14 GND
2 TXOUT 0 (－) 15 TXOUT 0 (＋)
3 TXOUT 1 (－) 16 TXOUT 1 (＋)
4 TXOUT 2 (－) 17 TXOUT 2 (＋)
5 TXCLKOUT (－) 18 TXCLKOUT (＋)
6 TXOUT 3 (－) 19 TXOUT 3 (＋)
7 RX (＋) [ SERTC (＋) ] 20 RX (－) [ SERTC (－) ]
8 TX (－) [ SERTFG (－) ] 21 TX (＋) [ SERTFG (＋) ]
9 TRIG-A/VD (－) [ CC1 (－) ] 22 TRIG-A/VD (＋) [ CC1 (＋) ]
10 NC [ CC2 (＋) ] 23 NC [ CC2 (－) ]
11 NC [ CC3 (－) ] 24 NC [ CC3 (＋) ]
12 NC [ CC4 (＋) ] 25 NC [ CC4 (－) ]
+12V (KP-F500PCL)
13 GND 26
GND (KP-F500SCL)
D.OUT2 (Connector 2: used for Medium configuration)
Pin No. Signal Pin No. Signal
+12V (KP-F5000PCL)
1
GND (KP-F500SCL)
14 GND
2 TYOUT 0 (－) 15 TYOUT 0 (＋)
3 TYOUT 1 (－) 16 TYOUT 1 (＋)
4 TYOUT 2 (－) 17 TYOUT 2 (＋)
5 TYCLKOUT (－) 18 TYCLKOUT (＋)
6 TYOUT 3 (－) 19 TYOUT 3 (＋)
7 NC 20 NC
8 NC 21 NC
9 NC 22 NC
10 NC 23 NC
11 NC 24 NC
12 NC 25 NC
+12V (KP-F500PCL)
13 GND 26
GND (KP-F500SCL)
SDR connector (3M) or equivalent
- The digital out cable should be comprised of a twisted pair of wires having 100Ω characteristic impedance and an outer
heath shield type conductor.
- Connect the shield (ground) of the digital out cable to the ground terminal of the video equipment, frame grabber, etc.
- TX: Transmit data from camera to PC
- RX: Transmit data from PC to camera
(Note) Please do not unplug and insert cable (digital out cable) with a power supplied to a camera.
Install clamp filter (ZCAT 2035-0930A: TDK) at both ends (camera and video processor ends) in the CE marking legion.
2. DCIN connector
PIN NO. Signal PIN NO. Signal
1 GND 7 Trigger/VD IN
---- (KP-F500PCL)
2
+12V (KP-F500SCL)
8 GND
3 GND 9 ----
4 ---- 10 FLASH OUT / VD OUT
5 GND 11 ----
6 ---- 12 GND
Connector (camera side) : SNH-10-12(RPCB) SAMWOO or equivalent
Plug (matching cable plug : HR10A-10P-12S(01) HIROSE or equivalent
(Note) Please do not unplug and insert cable (camera cable) with a power supplied to a camera.